Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: Chris Stables ,

Text:

We never suspect a board issue until we have ruled out parts. I know you have tried everything possible with what you have on hand but you will need to completely rule out a faulty part.
We would usually put the logic board into a known good housing to rule out parts but you can try.
1.       Different charge cable.
2.       Different PC or Mac
3.       Disconnect all the flex cables except for the battery and charge port and see if you can restore.
-Other than that you will need to install a new battery and charge port. You said using 3uTools which is a good program that it goes from recovery to normal mode and hangs on the apple logo and status bar, this would point me in the direction of a parts problem and not a board problem. However a have not run into this on the 11 series before as they are fairly new so I could be wrong.
+Other than that you will need to install a new battery and charge port. You said using 3uTools which is a good program that it goes from recovery to normal mode and hangs on the apple logo and status bar, this would point me in the direction of a parts problem and not a board problem. However I have not run into this on the 11 series before as they are fairly new so I could be wrong.

Status:

open

Ursprünglicher Beitrag von: Chris Stables ,

Text:

We never suspect a board issue until we have ruled out parts. I know you have tried everything possible with what you have on hand but you will need to completely rule out a faulty part.

We would usually put the logic board into a known good housing to rule out parts but you can try.

1.       Different charge cable.

2.       Different PC or Mac

3.       Disconnect all the flex cables except for the battery and charge port and see if you can restore.

Other than that you will need to install a new battery and charge port. You said using 3uTools which is a good program that it goes from recovery to normal mode and hangs on the apple logo and status bar, this would point me in the direction of a parts problem and not a board problem. However a have not run into this on the 11 series before as they are fairly new so I could be wrong.

Status:

open