Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: jayeff ,

Text:

Hi @noeinstein ,
I realize that you replaced the control board but did you get the exact same board model for a replacement?
-Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board (if it is printed on it) is [link|https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
+Have read that there are several boards available but they have to be an exact match with the machine. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board (if it is printed on it) is [link|https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
Looking at the [document|25956|tech sheet] for the washer, an F99 code means it could also be a mismatch between the CCU and the UI boards. (see p.8), that’s why I asked about the board number.
FYI. Sometimes the Ifixit website’s spam iRobot gets it wrong. It thinks that long number strings e.g. model numbers, are spam phone numbers and deletes the post. I have re-opened your deleted posts and then deleted any duplicated posts to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.
Moderator.

Status:

open

Bearbeitet von: jayeff ,

Text:

Hi @noeinstein ,
-
-
I realize that you replaced the control board but did you get the exact same board model for a replacement?
- Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board is [link|https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
+Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board (if it is printed on it) is [link|https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
-Looking at the [document|25956|tech sheet] for the washer, an F99 code means it could be a mismatch between the CCU and the UI boards. (see p.8)
+Looking at the [document|25956|tech sheet] for the washer, an F99 code means it could also be a mismatch between the CCU and the UI boards. (see p.8), that’s why I asked about the board number.
-FYI. Sometimes the Ifixit website’s spam iRobot gets it wrong and it’s too aggressive when deleting “spam”. It thinks that long number strings e.g. model numbers, are spam phone numbers and deletes the post. I have re-opened your deleted posts and then deleted any duplicate posts to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.
+FYI. Sometimes the Ifixit website’s spam iRobot gets it wrong. It thinks that long number strings e.g. model numbers, are spam phone numbers and deletes the post. I have re-opened your deleted posts and then deleted any duplicated posts to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.
Moderator.

Status:

open

Bearbeitet von: jayeff ,

Text:

Hi @noeinstein ,
-Are you using the [document|25956|tech sheet] for the washer or just what you’ve found online for the codes?
-I realize that you replaced the control board but did you get the exact same board for a replacement? Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board is [link|https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
-Looking at the tech sheet for your model linked above, an F99 code means it could be a mismatch between the CCU and the UI boards. (see p.8)
+I realize that you replaced the control board but did you get the exact same board model for a replacement?
-FYI. Sometimes the Ifixit website’s spam iRobot get it wrong and it’s too agressive. It thinks that long number strings are spam phone numbers and deletes the post. I have reopened your deleted posts and then deleted any duplicate post to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.
+ Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board is [link|https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
+
+Looking at the [document|25956|tech sheet] for the washer, an F99 code means it could be a mismatch between the CCU and the UI boards. (see p.8)
+
+FYI. Sometimes the Ifixit website’s spam iRobot gets it wrong and it’s too aggressive when deleting “spam”. It thinks that long number strings e.g. model numbers, are spam phone numbers and deletes the post. I have re-opened your deleted posts and then deleted any duplicate posts to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.
Moderator.

Status:

open

Bearbeitet von: jayeff ,

Text:

Hi @noeinstein ,
Are you using the [document|25956|tech sheet] for the washer or just what you’ve found online for the codes?
I realize that you replaced the control board but did you get the exact same board for a replacement? Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board is [link|https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
Looking at the tech sheet for your model linked above, an F99 code means it could be a mismatch between the CCU and the UI boards. (see p.8)
-FYI. Sometimes the Ifixit website’s spam iRobot get it wrong and it too agressive. It thinks that long number strings are spam phone numbers and deletes the post. I have reopened your deleted posts and then deleted any duplicate post to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.
+FYI. Sometimes the Ifixit website’s spam iRobot get it wrong and it’s too agressive. It thinks that long number strings are spam phone numbers and deletes the post. I have reopened your deleted posts and then deleted any duplicate post to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.
Moderator.

Status:

open

Bearbeitet von: jayeff ,

Text:

Hi @noeinstein ,
Are you using the [document|25956|tech sheet] for the washer or just what you’ve found online for the codes?
I realize that you replaced the control board but did you get the exact same board for a replacement? Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board is [link|https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
-Looking at the tech sheet for your model linked above, an F99 code means, it could be a mismatch between the CCU and the UI boards. (see p.8)
+Looking at the tech sheet for your model linked above, an F99 code means it could be a mismatch between the CCU and the UI boards. (see p.8)
FYI. Sometimes the Ifixit website’s spam iRobot get it wrong and it too agressive. It thinks that long number strings are spam phone numbers and deletes the post. I have reopened your deleted posts and then deleted any duplicate post to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.
Moderator.

Status:

open

Bearbeitet von: jayeff ,

Text:

Hi @noeinstein ,
Are you using the [document|25956|tech sheet] for the washer or just what you’ve found online for the codes?
-I realize that you replaced the control board but did you get the exact same board for a replacement? Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board is [https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
+I realize that you replaced the control board but did you get the exact same board for a replacement? Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board is [link|https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible
-Looking at the tech sheet for your model linked above, an F99 code means, it could be a mismatch between the CCU and the UI boards.
+Looking at the tech sheet for your model linked above, an F99 code means, it could be a mismatch between the CCU and the UI boards. (see p.8)
FYI. Sometimes the Ifixit website’s spam iRobot get it wrong and it too agressive. It thinks that long number strings are spam phone numbers and deletes the post. I have reopened your deleted posts and then deleted any duplicate post to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.
Moderator.

Status:

open

Ursprünglicher Beitrag von: jayeff ,

Text:

Hi @noeinstein ,

Are you using the [document|25956|tech sheet] for the washer or just what you’ve found online for the codes?

I realize that you replaced the control board but did you get the exact same board for a replacement? Have read that there are several boards available but they have to be an exact match. Check what is printed on the board (or sticker) on the board and compare it to the original, if you still have it. The Whirlpool part number for the board is [https://www.appliancepartspros.com/whirlpool-cntrl-elec-wpw10156258-ap6015884.html|WPW10156258] and this supplier says that it is compatible

Looking at the tech sheet for your model linked above, an F99 code means, it could be a mismatch between the CCU and the UI boards.

FYI. Sometimes the Ifixit website’s spam iRobot get it wrong and it too agressive. It thinks that long number strings are spam phone numbers and deletes the post. I have reopened your deleted posts and then deleted any duplicate post to avoid any confusion. This will restore your reputation points on the forum. For every deleted spam post 100 points are deducted.

Moderator.

Status:

open