Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
-
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. But I read about many other versions up to 1.0.7 and a almost released 1.0.8.
+
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Fixhub reports no new firmware while still on 1.0.3
Original-Beitrag von::
I received my fixhub today and I am very happy with it. It is my first upgrade from my weller (with resistors to set the temperature). It is very fast on the set temperature and feels comfortable to use.
When connected to my pc it reports firmware version 1.0.3. (both station as soldering pencil) but not a newer version available. But I read about many other versions up to 1.0.7 and a almost released 1.0.8.
I tried with edge, chrome and opera, all connected without any issues but no newer firmware versions or the option to upgrade or downgrade.
Not sure what to do to get it updated.