It could be a worn or faulty clutch or perhaps a worn or faulty mode shifter.
-
Here's a [https://www.youtube.com/watch?v=Zmh8hpqc9FQ|video] that shows how to replace it which may help. At least you can then see if it is OK or not.
+
Here's a [link|https://www.youtube.com/watch?v=Zmh8hpqc9FQ|video] that shows how to replace the clutch which may help. At least you can then see if it is OK or not.
The part number for the clutch shown in the video i.e. WH05X24185 is for the one used in your model washer.
-
Here's a [https://www.youtube.com/watch?v=sp_637ndaNY|video] that shows how to replace it. The part number for the shifter shown in the video i.e. WH03X30517 is for the one used in your model washer.
+
Here's a [link|https://www.youtube.com/watch?v=sp_637ndaNY|video] that shows how to replace the mode shifter. The part number for the shifter shown in the video i.e. WH03X30517 is for the one used in your model washer.
If the problem is caused by either of these two parts, search online for the ''part number only'', to find suppliers that suit you best.
Here's the [document|32677|mini manual] that may also help. Go to p.2 and locate the ''field service mode entry'' procedure and check if performing the tests shows any error codes. The error codes and their repair action information are shown on p.1
Hi @courtbug
It could be a worn or faulty clutch or perhaps a worn or faulty mode shifter.
Here's a [https://www.youtube.com/watch?v=Zmh8hpqc9FQ|video] that shows how to replace it which may help. At least you can then see if it is OK or not.
The part number for the clutch shown in the video i.e. WH05X24185 is for the one used in your model washer.
Here's a [https://www.youtube.com/watch?v=sp_637ndaNY|video] that shows how to replace it. The part number for the shifter shown in the video i.e. WH03X30517 is for the one used in your model washer.
If the problem is caused by either of these two parts, search online for the ''part number only'', to find suppliers that suit you best.
Here's the [document|32677|mini manual] that may also help. Go to p.2 and locate the ''field service mode entry'' procedure and check if performing the tests shows any error codes. The error codes and their repair action information are shown on p.1