Zum Hauptinhalt wechseln
Hilfe

Ursprünglicher Beitrag von: oldturkey03 ,

Text:

Linda, if the answer from mayer should not work, keep in mind that the "Check lint screen" light is just a reminder to check and clean the lint screen before or after each load. There is not a sensor that will detect if it's clean or dirty. The "Check lint screen" should turn off as soon as the dryer is started. Check the wire harness connections between the console and the electronic control board.  If it never turns off then the control board might need to be replaced. You should run a diagnostics on your dryer. Check [http://media.fotki.com/1_p,sqkfkqfbrgbrskkxgtqsskgwtqkq,vi/rftqwgtbwxtsdrtbfww/1/1303472/5961857/image20323img-or.jpg|on here] to see how to get into the mode. You can download the service manual for your dryer [https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/cdce3c10dcb5382285256aa20064beaa?OpenDocument|from here.] Hope this helps, good luck.

Status:

open