Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: Dan Thaman ,

Text:

Give it to a local pro! it will save you the cost and headache, it needs to be done properly with 3000$ machine not a hair-dryer or whatnot (trust me, I fix ppl's utube stuff-ups almost everyday, and it's a lot harder after they have messed it up following an internet tutorial!)
 
Just have a look in classifieds or computer stores for a ''PROFESSIONAL'' (not some back-yard-er with a paint-stripper or someone selling you 2$ worth of screws for 30$ and telling you to remove your x-clamps and drill thru ur chassis -good way to perma-warp ur PCB) Ask them first what their qualifications are& what equipment they plan to use, or you may end-up with a temporary fix or worse.
 
A decent pro should charge between about 100 and 50$ (for a professional reflow - sufficient in about 80% of cases if done correctly, a reball is more permanent, but carries a small risk& an extra cost) and they should offer warranty
A decent pro should charge between about 100 and 50$ (for a professional reflow - sufficient in about 80% of cases if done correctly, a reball is more permanent, but carries a small risk& an extra cost) and they should offer warranty
 
Good Luck :D

Status:

open

Bearbeitet von: Dan Thaman ,

Text:

Give it to a local pro! it will save you the cost and headache, it needs to be done properly with 3000$ machine not a hair-dryer or whatnot (trust me, I fix ppl's utube stuff-ups almost everyday, and it's a lot harder after they have messed it up following an internet tutorial!)
 
Just have a look in classifieds or computer stores for a ''PROFESSIONAL'' (not some back-yard-er with a paint-stripperpaint-stripper or someone selling you 2$ worth of screws for 30$ and telling you to remove your x-clamps and drill thru ur chassis -good way to perma-warp ur PCB) Ask them first what their qualifications are& what equipment they plan to use, or you may end-up with a temporary fix or worse.
Just have a look in classifieds or computer stores for a ''PROFESSIONAL'' (not some back-yard-er with a paint-stripperpaint-stripper or someone selling you 2$ worth of screws for 30$ and telling you to remove your x-clamps and drill thru ur chassis -good way to perma-warp ur PCB) Ask them first what their qualifications are& what equipment they plan to use, or you may end-up with a temporary fix or worse.
 
A decent pro should charge between 100 and 50$ and should offer warranty
 
Good Luck :D

Status:

open

Ursprünglicher Beitrag von: Dan Thaman ,

Text:

Give it to a local pro! it will save you the cost and headache, it needs to be done properly with 3000$ machine not a hair-dryer or whatnot (trust me, I fix ppl's utube stuff-ups almost everyday, and it's a lot harder after they have messed it up following an internet tutorial!)

Just have a look in classifieds or computer stores for a ''PROFESSIONAL'' (not some back-yard-er with a paint-stripper) Ask them first what their qualifications are& what equipment they plan to use, or you may end-up with a temporary fix or worse.

A decent pro should charge between 100 and 50$ and should offer warranty

Good Luck :D

Status:

open