SERVICE MANUAL for KITCHENAID STAND MIXER
Downloaded from www.Manualslib.com manuals search engine
Models K45SS KS M75 KSM90 KS M103 KSM110 KS M150 KSM151 K5SS KSM5 KS M50P KSMC50 KPM5 KPM50 KP50P
Printed in U.S.A. September, 2005
LIT4177310-C
KITCHENAID
Stand Mixer Service Manual Lit4177310-C 2005 KITCHENAID
Safety Guidelines
This Service Manual is written for the Professional Service Technician who has familiarity with the KitchenAid Stand Mixer. The following Safety Guidelines should be adhered to when servicing this product.
SERVICE ENVIRONMENT
- ·The workplace will be dry and sanitary at all times and all units should be inspected for cleanliness before any work is started.
- •Visually inspect the unit requiring service in a well luminated area.
- ·A mild, non-abrasive dishwashing soap solution and clean towel can be used to wash any unit requiring attention.
- •The hands of the service technician should be clean at all times during service procedure.
ELECTRICAL CONSIDERATIONS
- ·The workplace for the stand mixer will have properly grounded AC outlets that adhere to all Local Electrical Codes that are applicable at the time of repair.
- ·The Stand Mixer Power Cord should always be inspected first before testing the mixer operation. Do NOT run the mixer if the Power Cord is damaged -- replace it.
- ·All disassembly and assembly procedures discussed in this manual should be conducted with the unit disconnected from the AC mains.
- ·Do NOT leave the unit unattended while running the mixer for speed range and bowl clearance checks. Always unplug the unit immediately after concluding these tests.
Technician
- ·The Service Technician should wear Protective Eyewear at all times when conducting a repair on the Stand Mixer.
- •Loose fitting sweaters, shirts sleeves or bracelets should NOT be worn while servicing the Stand Mixer.
KITCHENAID
Stand Mixer Service Manual Lit4177310-C 2005 KITCHENAID
INDEX: Stand Mixer Repair Manual
K45SS KSM75 KSM90 KSM103 KSM110 KSM150 KSM151 K5SS KSM5 KSM50P KSMC50 KPM5 KPM50 KP50P
| SECTION | SUBJECT | PAGE |
|---|---|---|
| - | General Information | 1 |
| 1 | Disassembly of Gearcase and Planetary | 2 |
| 2 | Disassembly of Motor and Control Unit | 6 |
| 3 | Repairs to Motor and Control Unit | 11 |
| 4 | Repairs to Gearcase and Planetary | 16 |
| 5 | Repairs to Pedestal | 21 |
| 6 | Adjustment to Control Unit | 22 |
| 7 | Repairs to Bowl Lift Assembly | 26 |
| 8 | Troubleshooting the Bowl Lift Assembly | 30 |
| APPENDIX | SUBJECT | |
| A | Tools Required for Stand Mixer Service | |
| B | Problem Solving Quick Reference Guide | |
| C | Domestic Model Wiring Diagram | |
| D | International Model Wiring Diagram - RF Filter | |
| E | International Model Wiring Diagram - Bowl Interlock RF Filter | |
| F | Stand Mixer Serial Number Codes |
**Table Caption: This table is a Table of Contents for a stand mixer service manual, outlining the different sections, their subjects, and page numbers, along with appendices for additional reference
