En 2a8a513128c1d33166c65ab81a984af2
1 Seite · 12.18 KB · PDF
MAINTENANCE HOW TO ADJUST THE DRIVE CABLE
WARNING: Before you adjust the drive cable, release the engine stop lever and wait for the engine to stop.
If the drive system does not engage and disengage correctly, check the handle for correct assembly. Make sure that all parts are in good condition, not broken or bent, and that all fasteners are tight.
Worn parts and cable stretch will change the performance of the drive system. When you mow in high or thick grass or on hills, the drive system can slip. If the drive system is slipping, adjust as follows or take the mower to an authorized service center.
IMPORTANT: Before you start the engine, operate the engine stop lever several times. Make sure the engine stop cable moves freely.
NOTE: The engine
