OptiFlex SERVICE MANUAL Models: 2030 and 2060 Serial Numbers- 5000

Models:

2030 (Serial Numbers- 5000 and above) 2060 (Serial Numbers- 5000 and above)

TABLE of CONTENTS

Table Caption: This table outlines the structure of a technical manual, detailing sections such as safety, theory of operation, troubleshooting, and replacement parts, along with their corresponding page numbers.

FOREWORD

OptiFlex ® 2030 & 2060

Read, understand and follow the Safety Precautions and information contained in this manual.

This manual contains the necessary safety, and field service information for those Field Service Technicians, approved by Chattanooga Group, to perform field service on the OptiFlex CPM Models 2030 and 2060 units.

At the time of publication, the information contained herein was current and up to date. However, due to continual technological improvements and increased clinical knowledge in the field of electrotherapy, as well as Chattanooga Group's policy of continual improvement, Chattanooga Group reserves the right to make periodic changes and improvements to their equipment and documentation without any obligation on the part of Chattanooga Group.

It is the sole responsibility for field technicians to stay informed and trained in the latest technology utilized in the OptiFlex CPM Models 2030 and 2060 units by Chattanooga Group from time to time, as significant improvements are incorporated, Service Bulletins will be produced and made available on our web site (www.chattgroup.com) in lieu of reprinting a complete manual prematurely. These Service Bulletins will provide updated service information and technology improvements to the OptiFlex CPM Models 2030 and 2060 for use by approved service technicians.

'Approved Service Technician' Definitions;

1. Level IThose Field Service Technicians that have successfully completed the minimal training required by Chattanooga Group, in basic service techniques.
2. Level IIThose Field Service Technicians that have successfully completed Level I Training as well as Level II training as required to perform specific troubleshooting and repair techniques and procedures.
3. Level IIIThose Field Service Technicians that have successfully completed Levels I & II Training as well as Level III Advanced Training as required to perform all necessary Troubleshooting and Repair techniques. The Technician having successfully completed the three levels of training and coupled with experience should have the ability to train other technicians in Level I and Level II Training with the necessary Training Materials from Chattanooga Group.
4. Temporary-

Chattanooga Group, at its discretion and based on known experience of the technician, may grant a 'Temporary Approval' to a field technician for particular troubleshooting and repair of a specific unit requiring immediate attention. This 'Temporary Approval' in no fashion acknowledges the training level of a technician as defined above. This 'Temporary Approval' is utilized only in unique situations for a specific unit for a specific service technique only and is documented as such.

Due to the complex nature of the technology utilized by Chattanooga Group, the recommended troubleshooting techniques are to determine 'Bad Board' and board replacement only. No board component level troubleshooting is recommended nor will information or parts be supplied by Chattanooga Group. Any board component level troubleshooting performed will be at sole risk and liability of the Service Technician performing such troubleshooting techniques.

This equipment is to be sold and used only under the prescription and supervision of a licensed medical practitioner.

This equipment is to be serviced only by an 'Approved Service Technician'.

For Additional Service Contact: Chattanooga Group CPM Support Department Toll Free: 1-866-266-0026 Outside USA: +1-423-870-7200

SAFETY PRECAUTIONS

Precautionary Symbol Definitions

The precautionary instructions found throughout this manual are indicated by specific symbols. Understand these symbols and their definitions before operating or servicing this equipment. The definitions of these symbols are as follows:

CAUTION

A. CAUTION

Text with a 'CAUTION' indicator will explain possible Safety infractions that could have the potential to cause minor to moderate injury or damage to equipment.

WARNING

B. WARNING

Text with a 'WARNING' indicator will explain possible Safety infractions that will potentially cause serious injury and equipment damage.

!

DANGER

C. DANGER

Text with a 'DANGER' indicator will explain possible Safety infractions that are imminently hazardous situations that would result in death or serious injury.

D. EXPLOSION HAZARD

Do not use this equipment in the presence of flammable anesthetics. This symbol is also prominently displayed on the serial number plate of the unit.

E. NOTE:

Throughout this manual 'NOTE' may be found. The Notes are helpful information to aid in the particular area or function being described.

Safety Precautions

Read, understand and follow all safety precautions found in this manual. Below are general safety precautions that must be read and understood before attempting any service techniques on these units. Throughout this manual specific safety precautions will be found. Read, understand and follow all safety precautions.

• Read this manual before assembling or using OptiFlex.
• Only