Zum Hauptinhalt wechseln

Apple Wireless Keyboard Hauptplatine ersetzen

Was du brauchst

  1. Apple Wireless Keyboard Hauptplatine ersetzen, Hauptplatine: Schritt 1, Bild 1 von 2 Apple Wireless Keyboard Hauptplatine ersetzen, Hauptplatine: Schritt 1, Bild 2 von 2
    • Führe den Spudger aus Metall ein, um die Kunststoffteile unter der Tastatur zu öffnen.

  2. Apple Wireless Keyboard Hauptplatine ersetzen: Schritt 2, Bild 1 von 1
    • Entferne die Schraube

  3. Apple Wireless Keyboard Hauptplatine ersetzen: Schritt 3, Bild 1 von 3 Apple Wireless Keyboard Hauptplatine ersetzen: Schritt 3, Bild 2 von 3 Apple Wireless Keyboard Hauptplatine ersetzen: Schritt 3, Bild 3 von 3
    • Ziehe den Verschluss nach oben und diskonnektiere die Verbindungskabel.

  4. Apple Wireless Keyboard Hauptplatine ersetzen: Schritt 4, Bild 1 von 1
    • Halte das Verbindungskabel und drücke die Hauptplatine aus ihrer Position.

  5. Apple Wireless Keyboard Hauptplatine ersetzen: Schritt 5, Bild 1 von 1
    • Löse den Verschluss der Hauptplatine.

  6. Apple Wireless Keyboard Hauptplatine ersetzen: Schritt 6, Bild 1 von 1
    • Entferne die Hauptplatine aus ihrer Fassung.

Abschluss

Um dein Gerät wieder zusammenzusetzen, befolge diese Schritte in der umgekehrten Reihenfolge.

20 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Steffen hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›

Nicola

Mitglied seit: 11/14/13

638 Reputation

1 Anleitung geschrieben

9 Kommentare

Hi, anyone know where its possible to buy this logic board? My bluetooth chip is apparently broken

steve - Antwort

Which model of keyboard is this, because my A1255 doesn't disassemble like this - the battery terminal is solidly restrained inside the tube by means of a metal expansion ring. Doesn't seem user repairable :(

gordon jackson - Antwort

My power button was stuck. The shell was dented. This was an easier way to access and remove the button so I was able to file the inside of the tube smooth so the button would move freely.

Tony - Antwort

I have disassembled my keyboard as shown above, but now I need a replacement Wireless Keyboard Logic Board. I have not been able to find one. Any suggestions?

Martin Rubio - Antwort

Very nice! in my case the flat cable was not properly connecting. I only found out when i opened the cap to the logic board and saw the cable sitting slanted in its connector. Put it back straight and now it works again. Cheers!!

mollymol - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 5

Letzte 7 Tage: 20

Letzte 30 Tage: 106

Insgesamt: 48,034