I press the power button it doesn't come on
The lights comes on and when i press the power button it doesn't come on
Ansicht:
Bestätigte AbstimmungenJeder mit mehr als 20 Reputationspunkten kann problematische Kommentare und Beiträge melden.
Details anzeigen
Veröffentlicht:
The lights comes on and when i press the power button it doesn't come on
Rep: 685,2 Tsd.
Veröffentlicht:
Try 1 &2 first as they are the most common
Solution 1:
Thermal Fuse
The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good. If overheated the fuse will have no continuity meaning the electrical path is broken and the fuse has blown. A multimeter can be used to test it for continuity. Be aware that a blown thermal fuse is an indication of a restricted exhaust vent from the dryer to the outside. Always check the dryer venting when replacing a blown thermal fuse
Solution 2:
Start Switch
To determine if the start switch is defective, attempt to start the dryer. If the dryer hums but does not start, the start switch is not at fault. If the dryer does not respond or make any noise, the start switch could be at fault. Use a multimeter to test the start switch for continuity. If the switch does not have continuity, replace it.
Solution 3:
Door Switch
Solution 4:
Drive Motor
Solution 5:
Main Control Board
Ups! Ich will meine Meinung nochmal ändern.
Erweitern / Reduzieren
Bestätigen
Positiv
Ablehnen
Negativ
Hilfe öffnen
Seite 1 von 1