iPhone X A1902 Parts
Grab a toolkit for your iPhone X A1902 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Ersatzteile für iPhone X A1902:
iFixit Insight iPhone X Case
We live to share gadget guts with the world. Now you can show off the insides of your iPhone X with a new Insight iPhone Teardown Case.
Flexible LCD holder
iPhone 8/8 Plus and iPhone X Battery Connector
Replace a damaged or corroded battery cable connector on the logic board of an iPhone 8, iPhone 8 Plus, or iPhone X. This part requires microsoldering.
iPhone X Aftermarket Blank Rear Case
Replace a broken or scratched rear case and edge bezel on an iPhone X with this new blank aftermarket rear case.
iPhone X Aftermarket Blank Rear Glass Panel
Replace a broken or scratched rear panel with this new blank aftermarket rear panel.
iPhone X Audio Control Button Bracket
Replace a bent or missing metal bracket that supports the internal volume control buttons.
iPhone X Audio Control Cable and Brackets
Replace the internal audio and power switches and their brackets for an iPhone X. This cable is soldered to the wireless charging antenna coil. Replacing this component...
iPhone X Bare Logic Board
Replace a bare logic board (with no components) compatible with the iPhone X. This is only the board to which all the surface soldered components would be mounted.
iPhone X Battery
Replace a 2716 mAh battery compatible with iPhone X. 3.81 Volts (V), 10.35 Watt Hours (Wh). Compatible with all iPhone X models.
iPhone X Battery Adhesive Strips
Replace the adhesive film that that secures the battery to the rear case compatible with the iPhone X model A1865, A1901, A1902 smartphone.
iPhone X Bluetooth Antenna
Replace the Bluetooth Antenna in the top right of the rear case compatible with the iPhone X model #A1865, A1901, A1902.
iPhone X Bottom Screws
Replace a stripped or missing bottom exterior screw that holds the case closed.
iPhone X Case Button Set
Replace a scratched or missing exterior case button face including the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.
iPhone X Digitizer Cable Connector Foam Pads
Replace the adhesive backed foam spacer pad on the logic board connector bracket that presses on the connectors from the digitizer and lightning port assembly in an iPhon...
iPhone X Display Assembly Adhesive
This custom cut adhesive film secures the front screen display assembly to the case of an iPhone X.
iPhone X Earpiece Speaker
Replace an earpiece speaker compatible with the iPhone X model #A1865, A1901, A1902. Fix problems with phone call audio.
iPhone X Earpiece Speaker and Sensor Assembly
Replace an earpiece speaker or sensor assembly compatible with the iPhone X model A1865, A1901, A1902. Includes the Flood Illuminator, Proximity Sensory, and Microphone.
iPhone X Earpiece Speaker Mesh
Replace the mesh that covers the earpiece speaker opening compatible with the iPhone X model #A1865, A1901, A1902.
iPhone X Front Camera Assembly
Replace a malfunctioning front-facing camera assembly and restore selfie camera functions.
iPhone X Front Camera Assembly Brackets
Replace a bent or missing pair of metal brackets for the front-facing camera assembly.
iPhone X Front Camera Foam Pads
Replace the adhesive backed foam spacer for the front-facing cameras in an iPhone X. Set of five foam pads.
iPhone X Front Camera Frame
Replace the plastic camera alignment frame adhered to the inside of the front panel of your smartphone.
iPhone X Front Facing Camera Cables Conductive Adhesive Set
Replace the conductive adhesive securing the three cables from the front-facing camera assembly. One set of three adhesive strips.
iPhone X Front Panel Clips
Replace a bent or missing front panel clip. This set of four retaining clips fit in the edges of the rear case and help hold the front panel assembly in place.
iPhone X Induction Flex Foam Pads
Replace the adhesive backed foam spacer on the induction flex cable in an iPhone X. Set of 5 pads.
iPhone X Interconnect Cable
Replace a damaged or corroded lower end interconnect cable. This part is compatible with an iPhone X.
iPhone X Lightning Connector Assembly
Replace a lightning connector assembly compatible with the iPhone X model #A1865, A1901, A1902. Includes the flex cable, logic board connector, lightning connector socket...
iPhone X Lightning Connector Microphone Foam Pads
Replace the adhesive backed foam spacer on the microphone that is part of the lightning connector assembly compatible with the iPhone X. Includes a set of 5 pads.
iPhone X Lightning Port Adhesive Gasket
Replace the adhesive foam gasket that fits between the lightning port socket and the center opening in the rear case compatible with the iPhone X.
iPhone X Logic Board Back Shield Sticker
Replace the black shield sticker covering the back side of the logic board compatible with iPhone X.
iPhone X Logic Board Connector Bracket Foam Pads
Replace the one large and three small adhesive backed foam spacer pads on the main part of the logic board connector bracket in an iPhone X. Set of 4 pads.
iPhone X Logic Board Connector Bracket Heat Dissipation Sticker
Replace the adhesive backed black graphite heat dissipation sticker on the back of the logic board connector bracket compatible with iPhone X.
iPhone X Logic Board Connectors Gasket Pads
Replace the adhesive foam gasket pads surrounding the logic board connectors compatible with iPhone X. Set of three pads for one replacement.
The iPhone X (as well as the 8 and 8 Plus) was formally announced by Apple on September 12, 2017. New features include a new, almost bezel-less display, a new hexa-core system-on-chip with improved system and graphics performance, a glass back, and wireless charging using the Qi Standard. Additional features include a True Tone display and upgraded cameras.
Model A1901 is for carriers in Japan.