iPhone Microsoldering
Kategorie auswählen
- Alle
- Accessories
- Adapters
- Adhesive Pads
- Adhesive Strips
- Antennas
- Batteries
- Buttons
- Cables
- Cameras
- Case Components
- Clips
- Display Components
- Dock Connectors
- Earbuds
- Flash
- Greifwerkzeuge
- Headphone Jacks
- Exklusiv bei iFixit
- iFixit Ausrüstung
- Kits
- Lenses
- Lightning Connector
- Logic Boards
- Microphones
- Mikro-Löten
- Midframe
- Motherboards
- Prying and Opening
- Screen Protectors
- Screens
- Screwdrivers and Nutdrivers
- Screws
- Sensors
- SIM
- Speakers
- Test Cables
- Toolkits
- Vibrators
Wähle dein iPhone Modell:
Ersatzteile für iPhone:
iPhone 6 Battery Connector
Replace the battery cable connector on the logic board of an iPhone 6. This part requires microsoldering.
iPhone 8 Plus Bare Logic Board
This is only the board to which all the surface soldered components would be mounted. This part does not include any other components.
iPhone 7 Plus Bare Logic Board
This is only the board to which all the surface soldered components would be mounted. This part does not include any other components.
iPhone 6 Plus LCD FPC Connector (J2019)
Replace the LCD data connector on the logic board of an iPhone 6 Plus. This part requires microsoldering.
iPhone X Wireless Charging Antenna
Replace a damaged or malfunctioning internal inductive charging coil in an iPhone X. This coil is soldered to the flex cable for the Audio Control Cable Assembly. Replac...
iPhone X Audio Control Cable and Brackets
Replace the internal audio and power switches and their brackets for an iPhone X. This cable is soldered to the wireless charging antenna coil. Replacing this component...
iPhone 8/8 Plus and iPhone X Battery Connector
Replace a damaged or corroded battery cable connector on the logic board of an iPhone 8, iPhone 8 Plus, or iPhone X. This part requires microsoldering.
iPhone 6 Plus Bare Logic Board
A bare circuit board with no components for an iPhone 6 Plus. This is only the board to which all the surface soldered components would be mounted.
iPhone 5s Digitizer FPC Connector (J4)
Replace the digitizer cable connector on the logic board of an iPhone 5s. This part requires microsoldering.
iPhone 6/6s/7 Backlight Diode
Replace the backlight diode on the logic board of an iPhone 6, iPhone 6s, iPhone 6s, or iPhone 7. This part requires micro soldering.
Geräteinformation
Apple first shipped the iPhone in June 2007 and has since carved out a large portion of the smartphone market for itself with the device.
Select your version above for parts and information!