Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Speziell für diesen Teardown benötigte Werkzeuge

Dieser Teardown ist keine Reparaturanleitung. Um dein AWEI BT Earbuds zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. Remove Earbud Cushion Remove Earbud Cushion
    • Remove Earbud Cushion

  2. Secure Earbud End (eg:Vice)
    • Secure Earbud End (eg:Vice)

  3. Using Pliers Gently Twist & Pry Away Sections, Do Not Twist more than 3-4mm Using Pliers Gently Twist & Pry Away Sections, Do Not Twist more than 3-4mm
    • Using Pliers Gently Twist & Pry Away Sections, Do Not Twist more than 3-4mm

  4. Inspect Earbud Wiring
    • Inspect Earbud Wiring

  5. Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side. Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side. Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side.
    • Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side.

  6. Carefully Separate the PCB to inspect the headphone's left & right earbud wiring. Cleaned up any broken connections by de-soldering, re-tinning wires & re-soldering to the PCB. Each side is labeled L + L - and R + R - the colored wire is positive and the bare wire is negative. Assemble Unit in reverse order. Assemble Unit in reverse order.
    • Carefully Separate the PCB to inspect the headphone's left & right earbud wiring. Cleaned up any broken connections by de-soldering, re-tinning wires & re-soldering to the PCB. Each side is labeled L + L - and R + R - the colored wire is positive and the bare wire is negative.

    • Assemble Unit in reverse order.

fugitiveALiEN

Mitglied seit: 28.02.2013

163 Reputation

1 Anleitung geschrieben

Team

My Techno Guy Mitglied von My Techno Guy

Business

1 Mitglied

1 Anleitung geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 1

Letzten 7 Tage: 3

Letzten 30 Tage: 11

Insgesamt: 629