Speziell für diesen Teardown benötigte Werkzeuge

Angehängtes Dokument

Diese Zerlegung ist keine Reparaturanleitung. Um dein Autosampler Node zu reparieren, verwende unsere Fehlerbehebungsseite.

Generally, there will also be ultrasonic components, such as wires, present within the node. There is no ultrasonic connected to our node in order to focus entirely on the autosampler
  • Generally, there will also be ultrasonic components, such as wires, present within the node. There is no ultrasonic connected to our node in order to focus entirely on the autosampler

Kommentar hinzufügen

Ensure you remove the battery first before doing anything else
  • Ensure you remove the battery first before doing anything else

Kommentar hinzufügen

  • If you choose to disconnect the wires from the terminal, we recommend you either write down the wires' respective locations on the terminal, or consult our pin documentation when reassembling

Kommentar hinzufügen

  • To disconnect the blue circled point on the solar charger, you have to remove the terminal at the blue circle on the board

Kommentar hinzufügen

  • Pull the module from the bottom; pulling the module in a different way may damage it

Kommentar hinzufügen

  • In the second image, one of the screws is already removed

Kommentar hinzufügen

  • With the interior of the small node removed, these are the components you should have (from left to right)

    • The battery

    • Solar charger with terminal still attached

    • Relay with terminal still attached

    • Module with antenna still attached

    • Board with 4 screws

Kommentar hinzufügen

Angehängte Dateien

Nicholas Jeng

Mitglied seit 16.01.2018

529 Reputation

3 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 10

Insgesamt: 68