Speziell für diesen Teardown benötigte Werkzeuge

Einleitung

This tear down includes a complete photographic guide for the removal of all internal components of a RIM Blackberry 8700c.

Dieser Teardown ist keine Reparaturanleitung. Um dein BlackBerry 8700c zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. In this first step you will remove the battery cover by pushing down on the button on the cover and sliding towards the bottom of the phone.
    • In this first step you will remove the battery cover by pushing down on the button on the cover and sliding towards the bottom of the phone.

      • To do this unscrew all four T6 screws

      • Once this is done gently remove the back cover of the phone by pulling first from the bottom towards you, then from the top upwards.

    Kommentar hinzufügen

  2. To remove the battery, place your fingernail in the slot at the top right of the battery and pull up.
    • To remove the battery, place your fingernail in the slot at the top right of the battery and pull up.

    Kommentar hinzufügen

    • Next, remove the back portion of the phone by removing four T6 Screws.

    • Once the screws have been removed, firmly grab the back cover and pull back from the front cover.

    Kommentar hinzufügen

    • To remove the middle portion of the phone you will again remove four T6 screws.

    • Follow the removal of the screws, you can now pull the front face plate away from the middle portion.

    Kommentar hinzufügen

    • Follow the removal of the screws, you can now pull the middle portion away from the main logic board.

    • Next, hold the logic board and remove the front face plate of the phone

    Kommentar hinzufügen

    • When the front face plate has been pulled away, be sure to grab the keypad as it may fall out.

    Kommentar hinzufügen

    • Next, use a metal spudger to unhook the earpiece from the inside of the front panel.

    Kommentar hinzufügen

    • Using a metal spudger, push back on the four clips holding the LCD screen to the logic board.

      • Next gradually pull the screen away from the board so that none of the clips are engaged.

    • Last, use a metal spudger to push back on the clip locking in the ribbon cable for the screen.

    Kommentar hinzufügen

    • The screen is now fully detached, and the phone is completely disassembled.

    Kommentar hinzufügen

k3nt

Mitglied seit 28.10.2009

42 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 18-4, Maness Fall 2009 Mitglied von Cal Poly, Team 18-4, Maness Fall 2009

CPSU-MANESS-F09S18G4

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 6,229