Was du brauchst
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Loosen the adhesive between the hinge cover and screen by inserting an opening pick and sliding it across
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Take a Jimmy (or similar tool) and pry up one corner of the hinge cover, and then insert an Opening Pick (or similar tool) where the Jimmy was
-
Repeat the same process with the other side
-
Now you should have one Opening Pick on each side of the hinge cover
-
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Slide the picks toward the center of the plastic hinge cover
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Roll the hinge cover toward the screen to free the clips nearest to the glass
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
The clips are put back in place by first lining up the little pin with the hole on the hinge cover
-
Then, push it up and back into its place
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Grab a Phillips 00 bit and take out
-