Zum Hauptinhalt wechseln

Einleitung

This teardown will show you all removable components of the Humax IRHD 5000C and how to remove them.

Dieser Teardown ist keine Reparaturanleitung. Um dein Humax IRHD 5000C zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. Unscrew the screws on the outside. Slide the top cover a bit to the back, and lift it from the enclosure.
    • Unscrew the screws on the outside.

    • Slide the top cover a bit to the back, and lift it from the enclosure.

  2. Remove the various pieces holding in the power supply. Remove power cable (already cut of in the photo).
    • Remove the various pieces holding in the power supply.

    • Remove power cable (already cut of in the photo).

    • Unscrew screws.

    • Disconnect mainboard cables.

    • Remove the power supply from the enclosure.

  3. Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen

    Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen
  4. Disconnect the cables connecting the mainboard to the front panel. With a flathead screwdriver, unclip the 2 topside clips, and 3 clips on the bottom of the enclosure, and the front will detach.
    • Disconnect the cables connecting the mainboard to the front panel.

    • With a flathead screwdriver, unclip the 2 topside clips, and 3 clips on the bottom of the enclosure, and the front will detach.

  5. Unclip the 4 clips from left to right, and remove the panel. With the pliers, clamp the white connector and push it through. With the pliers, clamp the white connector and push it through.
    • Unclip the 4 clips from left to right, and remove the panel.

    • With the pliers, clamp the white connector and push it through.

  6. Unscrew the screws and remove the mainboard from the case. Unscrew the screws and remove the mainboard from the case.
    • Unscrew the screws and remove the mainboard from the case.

knipwim

Mitglied seit: 01.09.2018

1.133 Reputation

9 Anleitungen geschrieben

What are those unsoldered pad connectors for? A hard drive?

Jessica Parnelli Fawkes - Antwort

Don’t know, could be a SCSI drive, there are 68 pins. I included a detail picture in the last step.

knipwim -

Kommentar hinzufügen

Statistik anzeigen:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 11

Insgesamt: 908