Speziell für diesen Teardown benötigte Werkzeuge


This teardown will help you to better hack and repair the KORG Monotron mini synt.

This battery powered synt is made of a real analog VCO a VCF and a LFO. The VCF is similar to the ancient KORG's classic MS-10 and MS-20. You can use the ribbon keyboard to create an incredible sound of the '70s .

There are a lot of infos on internet but this device deserves an appropriate space on IFIXIT

Dieser Teardown ist keine Reparaturanleitung. Um dein KORG Monotron zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. Here it is.... the Monotron !!!
  2. Only 4 PH1 screws
    • Only 4 PH1 screws

    • Note: Made in Japan !

    • Take care at the cables between two sides

    • Remove '''the flat cable''' from the ribbon controller to the pcb (pull with care using hands)

    • Remove the 2 ways connector for the speaker. Use hands (with care)

    • Take max care to the speaker controller. Easy to remove but difficult to re insert

    • Loudspeaker is glued to the enclosure

    • Here a really good image of the Monotron - Courtesy of Tim Stinchcombe

Carlo Romagnoli

Mitglied seit 14.02.2018

275 Reputation

2 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 4

Letzte 7 Tage: 6

Letzte 30 Tage: 33

Insgesamt: 716