Einleitung

PlayStation 3 super slim - how to fully disassemble.

You can see also: PlayStation 3 Super Slim Teardown


Please SUBSCRIBE to my channel ツ

Einführungsvideo

  1. Remove the three rubber feet, warranty sticker and four screws.
    • Remove the three rubber feet, warranty sticker and four screws.

    • Gently pull up on the bottom cover to remove it.

    Kommentar hinzufügen

  2. Slide the HDD cover toward the rear of the device to remove it.
    • Slide the HDD cover toward the rear of the device to remove it.

    • Remove the blue screw shown to remove the HDD caddy.

    Kommentar hinzufügen

    • Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it.

    Kommentar hinzufügen

    • Repeat step 3 for the front top finisher.

    Kommentar hinzufügen

  3. Frohes Fest, frohes Tüfteln!
    Satte 12 € Rabatt auf jeden Einkauf ab 50 €. Einfach den Code FIXMAS12 am Ende deines Bestellvorgangs eingeben
    Frohes Fest, frohes Tüfteln!
    Satte 12 € Rabatt auf jeden Einkauf ab 50 €. Einfach den Code FIXMAS12 am Ende deines Bestellvorgangs eingeben
    • Remove the two screws indicated in the disk reader.

    • Remove the five screws shown around the edge of the top cover.

    • Lift the top cover up to remove it.

    Kommentar hinzufügen

    • Move the optical disk reader assembly to the left to expose one of the screws holding the power supply in.

    • Remove the two screws indicated and carefully disconnect the cable on the right side of the power supply.

    • Lift the power supply up to remove it.

    Kommentar hinzufügen

    • Carefully disconnect the ribbon cables indicated.

    • Lift the optical disk reader up to remove it.

    • Disconnect and remove the white cable and ribbon cable indicated.

    Kommentar hinzufügen

    • Remove the seven screws indicated.

    • Lift the motherboard assembly up out of the lower half of the case to remove it.

    • Carefully disconnect the Wi-Fi antenna cables and fan connector indicated by red arrows.

    Kommentar hinzufügen

    • Remove the six screws indicated to separate the heatsink and shield from the motherboard.

    good job you just broke the ps3 super slim

    korvanjundskyrim - Antwort

  4. Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

18 weitere Nutzer haben diese Anleitung absolviert.

ZFix

Mitglied seit 09.12.2013

160.173 Reputation

304 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

279 Mitglieder

758 Anleitungen geschrieben

What's the name of the screwdriver that undo's the star shaped screws?

themasterassassin8787 - Antwort

It is a T8 Torx screwdriver! I'll add the tools to this guide =)

Sam Lionheart -

i took apart my ps3 super slim and put it back together but there is no power what so ever no red light at all

pastorjon.m - Antwort

One thing to pay attention to: The T8 Torx screws (at least on my 500GB model) are Tamper Proof TR8 screws, meaning you need a special screwdriver to undo them. A normal T8 wont work.

Wesley V - Antwort

Step 4: “simply remove the front finisher” - are you kidding me? I nearly broke mine!

versluis2000 - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 21

Letzte 7 Tage: 146

Letzte 30 Tage: 703

Insgesamt: 30,031