Zum Hauptinhalt wechseln

Was du brauchst

Dieser Teardown ist keine Reparaturanleitung. Um dein PlayStation Vita zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. PlayStation Vita Teardown, PlayStation Vita Teardown: Schritt 1, Bild 1 von 1
    • Hier ist sie, die Sony PS Vita. Sie sieht zwar den guten alten PSPs ähnlich, besitzt allerdings einige coole neue Features:

    • 4 Kern ARM Cortex-A9 MPCore Prozessor

    • 4 Kern SGX543MP4+ GPU

    • 512 MB RAM + 128 MB VRAM

    • 5" OLED Touchscreen mit 24-bit Farbtiefe und 960 x 544 Pixel (qHD) Auflösung sowie ein kapazitives Multi-Touch-Pad auf der Rückseite

    • Eine Front- und eine Rückkamera (jeweils VGA) mit je 0.3 Megapixel

    • Zwei Analog-Sticks

  2. PlayStation Vita Teardown: Schritt 2, Bild 1 von 3 PlayStation Vita Teardown: Schritt 2, Bild 2 von 3 PlayStation Vita Teardown: Schritt 2, Bild 3 von 3
    • Vorne finden sich die typische Raute aus mit Zeichen versehenen Knöpfen, ein Steuerkreuz und zwei Analog-Sticks. Wenn euch das noch nicht reicht, dann vergesst nicht die zwei Schultertasten, die drei kleineren Tasten unter den Analog-Sticks and natürlich den Touchscreen.

    • Die untere Seite der PS Vita ist vergleichsweise leer und wird lediglich von dem Ladeanschluss, dem Kopfhöreranschluss sowie der Abdeckung vom Speicherkartensteckplatz besiedelt.

    • Die obere Seite ist verziert mit den Lautstärkeregler Knöpfen, dem Powerschalter, dem Spielkartensteckplatz und dem Zubehöranschluss.

    • Dein Zubehör hat unter Umständen mehr Funktionen und ist weniger auffällig.

  3. PlayStation Vita Teardown: Schritt 3, Bild 1 von 1
    • Wenn wir die Vita umdrehen, werden wir umgehend vom Anblick eines geheimen Codes erfreut!

    • Es scheint ein Cheat-Code zu sein. Wir postulieren, dass man durch das Drücken aller Aktionstasten in Folge im Uhrzeigersinn, beginnend beim Dreieck, nach etwa 410 Runden unendlich Leben, Gelder, Manas, Likes und was-auch-immer-sonst-nochs erhält!

    • Scheinbar kann der versteckte Cheat-Code mehr, als euer Team in NFL Blitz 12 in einen Haufen laufender Hotdogs zu verwandeln. Als erstes seiner Art besitzt dieses Handheld-Gerät tatsächlich ein Multi-Touch-Pad auf dem Rücken. Wundert ihr euch, wozu man es nutzen könnte? Dann schaut euch diese Demonstration an!

    • Über dem hinteren Touchpad befindet sich die allererste eingebaute Kamera auf einem portablen PlayStation Gerät.

  4. PlayStation Vita Teardown: Schritt 4, Bild 1 von 1
    • Es ist Zeit "Welche Karte funktioniert mit meiner PS Vita?" zu spielen! Wir geben euch einen Hinweis: Es ist die, auf der "Sony PS Vita" draufsteht.

    • Lasst euch nicht von der Größe und Form der PS Vita Speicherkarte täuschen. Auch wenn sie den microSD Karten ähnlich sieht, sind diese zwei Typen nicht untereinander kompatibel. Ganz genau, wenn ihr mehr Speicherplatz wollt, müsst ihr schon Sonys proprietäre Karten kaufen.

    • Das gleiche betrifft die Spielekarten. Sie ähneln den SD Karten, aber die Pinbelegung und die Form sind so unterschiedlich, dass sie nicht kompatibel sind. Sorry Hackers.

  5. PlayStation Vita Teardown: Schritt 5, Bild 1 von 2 PlayStation Vita Teardown: Schritt 5, Bild 2 von 2
    • Die 3G Version der PS Vita kann sich über Wi-Fi mit dem Internet verbinden, oder auch über ein mobiles Netzwerk, wofür sich eine SIM Karte gleich seitlich am Gerät einsetzen lässt.

    • Anders als die amerikanischen können deutsche Geräte mit SIM Karten beliebiger Anbieter ausgestattet werden.

  6. PlayStation Vita Teardown: Schritt 6, Bild 1 von 3 PlayStation Vita Teardown: Schritt 6, Bild 2 von 3 PlayStation Vita Teardown: Schritt 6, Bild 3 von 3
    • Die Gehäusehälften werden durch gewöhnliche Kreuzschlitzschrauben #00 zusammengehalten. Sie sind alle einfach zugänglich, auch wenn zwei von ihnen clever unter der Abdeckung des Zubehöranschlusses versteckt sind.

    • 10 Punkte für Gryffindor!

  7. PlayStation Vita Teardown: Schritt 7, Bild 1 von 2 PlayStation Vita Teardown: Schritt 7, Bild 2 von 2
    • Wir entfernen alle Schrauben, aber die Gehäusehälften halten weiterhin fest zusammen. Naja, wo wäre denn auch der Spaß, wenn sich das Gerät selber öffnen würde? Wir begrüßen diese kleine Herausforderung.

    • Unser Öffnungswerkzeug hebelt das Gehäuse mit Leichtigkeit entzwei und entblößt dabei ein Meer an dicht gepackter Elektronik.

  8. PlayStation Vita Teardown: Schritt 8, Bild 1 von 2 PlayStation Vita Teardown: Schritt 8, Bild 2 von 2
    • Der Akku ist mit einem Paar Kreuzschlitzschrauben #00 an der Rückseite befestigt und das ist alles. Kein Kleber!

    • Der Akku der Vita läuft mit typischen 3.7 V und besitzt eine recht beachtliche Kapazität von 2210 mAh.

    • Wir sind sicher, dass bei Wi-Fi, Bluetooth, 3G, einem 5" qHD Display und zwei Touchpads jedes bisschen Akkukapazität gute Verwendung findet.

  9. PlayStation Vita Teardown: Schritt 9, Bild 1 von 2 PlayStation Vita Teardown: Schritt 9, Bild 2 von 2
    • Die Wireless Karte ist einfach an dem Haufen von Antennenkabeln, die an ihr angeschlossen sind, zu erkennen.

    • Ein Schnipsen mit unserem magischen Spudger befreit die Wireless Karte für eine Inspektion.

  10. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 10, Bild 1 von 1
    • With surgical-like precision and care, we remove the EMI shields from the wireless card to reveal:

    • Qualcomm PM8028 power management

    • Avago ACPM-7868 linear quad-band power amplifier module

    • Epcos 7964 SAW duplexer

    • Avago ACPM-5001 CDMA band 1 power amplifier module

    • Avago ACPM-5002 CDMA band 2 power amplifier module

    • Avago ACPM-5005 CDMA band 5 power amplifier module

    • Avago ACPM-5008 CDMA band 8 power amplifier module

  11. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 11, Bild 1 von 1
    • Turning our attention to the backside of the wireless card we find:

    • Qualcomm MDM6200, which supports HSPA+ speeds of up to 14.4 Mbps

    • Toshiba TY890A111222KA Mobile SDR SDRAM

    • Sony CXM3555ER antenna switch module

  12. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 12, Bild 1 von 2 PlayStation Vita Teardown: Schritt 12, Bild 2 von 2
    • The PS Vita is very modular. Check out all these connectors!

    • Having all the components on a single ribbon cable or PCB makes repair both difficult and costly. With all these individual components, the Vita should be easy to repair.

    • We detach a few connectors and remove the SIM card board from the colorful innards of the device.

  13. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 13, Bild 1 von 2 PlayStation Vita Teardown: Schritt 13, Bild 2 von 2
    • Recruiting the help of our spudger, we remove the rear-facing camera.

    • Though the Vita is the first Sony handheld device to boast a camera, you shouldn't cancel your D800 pre-order quite yet. The 640x480 pixel VGA quality (0.3 MP) camera isn't likely to wow the folks browsing your Flickr stream.

    • On a related note, the camera is of perfect quality to turn your world into an Augmented Reality.

  14. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 14, Bild 1 von 3 PlayStation Vita Teardown: Schritt 14, Bild 2 von 3 PlayStation Vita Teardown: Schritt 14, Bild 3 von 3
    • After a fair amount of disassembly, we find our old nemesis: adhesive!

    • We easily win the battle against the evil glue with our trusty plastic opening tool and separate the rear multi-touch pad from its frame.

    • Attached to the rear touchpad, we find an Atmel mXT224 touchscreen controller.

  15. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 15, Bild 1 von 2 PlayStation Vita Teardown: Schritt 15, Bild 2 von 2
    • Once the back case is off, components start flying out of the PS Vita faster than you can say "PlayStation."

    • The speakers come out without much fuss thanks in part to their pressure contacts. These types of connections are common in devices where space is a concern and there's no room for routing and soldering speaker wires.

    • With many modes of connectivity comes a whole bundle of antennas. Head-to-head gaming sure has come a long way.

  16. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 16, Bild 1 von 2 PlayStation Vita Teardown: Schritt 16, Bild 2 von 2
    • The trigger buttons are easily removed and are a simple, modular design. This means easier and cheaper repair for the masses!

    • If it ain't broke, don't fix it. Sony has used the same basic design for the R and L trigger buttons since the original PSP.

  17. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 17, Bild 1 von 2 PlayStation Vita Teardown: Schritt 17, Bild 2 von 2
    • The button boards are held on with nothing more than a few screws.

    • The PS Vita control interfaces are separated into several small pieces, further enhancing repairability of this device.

  18. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 18, Bild 1 von 3 PlayStation Vita Teardown: Schritt 18, Bild 2 von 3 PlayStation Vita Teardown: Schritt 18, Bild 3 von 3
    • As we begin removing the screws for the motherboard, it slowly dawns on us...

    • Colored screws! The pink-ish screws hold the motherboard in place while the blue screws hold attachments to the motherboard.

    • It's like a boy/girl screw party!

    • When we were done ogling the colored screws, we lifted the motherboard up and away, detaching the OLED display and touchscreen connectors.

  19. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 19, Bild 1 von 2 PlayStation Vita Teardown: Schritt 19, Bild 2 von 2
    • A spudger and a tiny bit of force frees the front-facing camera from the motherboard.

    • The small camera shares the same 640 x 480 pixel VGA quality as its rear-facing brother.

  20. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 20, Bild 1 von 2 PlayStation Vita Teardown: Schritt 20, Bild 2 von 2
    • With the motherboard finally all by itself, we can begin chip identification:

    • Sony CXD5315GG quad-core processor + system memory

    • Samsung KLM4G1FE3A-F001 NAND flash memory

    • Fujitsu MB44C026A

    • Marvell 88W878S-BKB2 Avastar WLAN/Bluetooth/FM Single-Chip SoC

    • Wolfson Micro WM1803E audio codec

    • STMicroelectronics 3GA51H gyroscope

    • Kionix KXTC9 three-axis MEMS accelerometer

  21. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 21, Bild 1 von 3 PlayStation Vita Teardown: Schritt 21, Bild 2 von 3 PlayStation Vita Teardown: Schritt 21, Bild 3 von 3
    In diesem Schritt verwendetes Werkzeug:
    iFixit Opening Picks (Set of 6)
    $4.99
    Kaufen
    • We baked our Vita in order to separate the front plastic (and fused OLED display) from the frame. Our quick recipe for frame removal:

    • Pre-heat oven to 200 F.

    • Place PS Vita front panel assembly in the oven and set timer for 10 minutes.

    • Remove the PS Vita from the oven and carefully peel the plastic off the front case using several guitar picks. Watch out -- it's hot!

    • Take 10 points back from Gryffindor.

    • Baking electronics: much easier than baking bread. All the ingredients are pre-mixed!

  22. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 22, Bild 1 von 3 PlayStation Vita Teardown: Schritt 22, Bild 2 von 3 PlayStation Vita Teardown: Schritt 22, Bild 3 von 3
    • The front plastic and OLED display slowly came off from the frame. Note that the OLED display is fused to the plastic, making this procedure very precarious.

    • Underneath we find another Atmel mXT224 touchscreen controller, which has graced tons of teardown devices in the past, including this one!

    • We also found a grid of what appears to be a smörgåsbord of capacitors, resistors (and one lonely diode) under the frame. Interesting...

  23. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    PlayStation Vita Teardown: Schritt 23, Bild 1 von 2 PlayStation Vita Teardown: Schritt 23, Bild 2 von 2
    • After much deliberation, the council of iFixit has deemed appropriate a reparability score of 8 out of 10.

    • All screws are standard Phillips #00. No security or proprietary bits here.

    • Modular design means lower repair costs because small parts can be replaced individually.

    • Only one component was held in place with adhesive: the rear touch panel.

    • Battery is not easily accessible, but it is definitely serviceable by the average user armed with the appropriate screwdriver.

    • The front plastic is fused to the OLED (and difficult to separate from the frame), making replacement of the display more expensive.

Besonderer Dank geht an diese Übersetzer:innen:

en de

44%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

31 Kommentare

I am just curious, is it possible to replace the PSVita 2000 LCD screen with the OLED screen of the regular Vita?

z4n7h3r - Antwort

No it aint possible

Damian -

where do you get one of the wireless cards

omer minhaj - Antwort

can someone tell where is the sixaxis motion sensor located?

aliefbimo adipancoro - Antwort

It's the gyroscope it is on the mother board

scruffy dynamite -

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 66

Letzte 7 Tage: 352

Letzte 30 Tage: 1,486

Insgesamt: 268,440