Einleitung

Here is a relatively inexpensive and small guitar amp. This particular one needed some repair. So while I was waiting for parts, I figured I might as well make a teardown.

Diese Zerlegung ist keine Reparaturanleitung. Um dein Rogue G10 zu reparieren, verwende unsere Fehlerbehebungsseite.

Here is the front view of the Rogue G10 amp. Back side shows 4 Phillips head screws that need to be removed. Here are the 4 #6x1" screws
  • Here is the front view of the Rogue G10 amp.

  • Back side shows 4 Phillips head screws that need to be removed.

  • Here are the 4 #6x1" screws

Kommentar hinzufügen

Use a small screwdriver or other small suitable prying instrument to remove the back cover. With the back cover removed the speaker and amp become visible. Remove the 2 Phillips head screws from the carrying handle. These two screws also attach the amp to the onside of the case.
  • Use a small screwdriver or other small suitable prying instrument to remove the back cover.

  • With the back cover removed the speaker and amp become visible.

  • Remove the 2 Phillips head screws from the carrying handle. These two screws also attach the amp to the onside of the case.

Kommentar hinzufügen

Here are the two screws from the handle. They are 1/8"x1 1/4" Remove the 16 screws from the plastic corners. These corners serve no purpose other than decoration. There are 4 rubber feet on the bottom of the amp.
  • Here are the two screws from the handle. They are 1/8"x1 1/4"

  • Remove the 16 screws from the plastic corners. These corners serve no purpose other than decoration.

  • There are 4 rubber feet on the bottom of the amp.

Kommentar hinzufügen

This shows the corners with the screws removed. Remove the rubber feet by removing the Phillips head screws. On the left and right side of the amp is a Phillips head screw, located  1/3 down from the top and to the front. These two screws hold the front panel to which the speaker is attached. Remove those.
  • This shows the corners with the screws removed.

  • Remove the rubber feet by removing the Phillips head screws.

  • On the left and right side of the amp is a Phillips head screw, located 1/3 down from the top and to the front. These two screws hold the front panel to which the speaker is attached. Remove those.

Kommentar hinzufügen

Here is the one on the right side, same location. Remove it as well With those two screws removed, the front panel which houses the speaker, can be simply removed
  • Here is the one on the right side, same location.

  • Remove it as well

  • With those two screws removed, the front panel which houses the speaker, can be simply removed

Kommentar hinzufügen

remove the front panel and place aside. With the front panel removed, the amp will now simply lift out as well Here is the amp totally disassembled. Straight forward job. No glue, no hidden screws.
  • remove the front panel and place aside.

  • With the front panel removed, the amp will now simply lift out as well

  • Here is the amp totally disassembled. Straight forward job. No glue, no hidden screws.

Kommentar hinzufügen

oldturkey03

Mitglied seit 29.09.2010

517.190 Reputation

120 Anleitungen geschrieben

Team

OTS Mitglied von OTS

Business

1 Mitglied

120 Anleitungen geschrieben

great thank you

Jazmin Backer - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 15

Insgesamt: 1,762