Einleitung
Tearing down my DPTA-RS1 stylus and replacing the dead li-ion battery without damaging the cosmetics.
Was du brauchst
-
-
The tip is glued-in-place. You need to wiggle it with force to loosen the glue.
-
-
-
The internals are now held in place by the plastic buttons. Remove them to proceed
-
-
-
-
With the buttons removed, you can now slide out the guts in the tip's direction. You can now perform a battery replacement.
-
-
-
Apparently, the pen is built by Hanvon and is powered by ATMEL's (now Microchip's) maXStylus Technology.
-
ATMEL maXStylus mXTS220 Capacitive Stylus Driver
-
TI BQ24232RGTR Li-ion Battery Charger
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.