Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

We are going to remove all lenses. Not any special tool required, lenses are kept in place by simple screw support.

Dieser Teardown ist keine Reparaturanleitung. Um dein Telescope zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. Here is the telescope with case. Now the lens covers are removed and thumb screw(left to the eye piece lens cover) also which locks the inner tube for fixed focus.
    • Here is the telescope with case.

    • Now the lens covers are removed and thumb screw(left to the eye piece lens cover) also which locks the inner tube for fixed focus.

  2. Now we are going to remove the objective lens . You can see a ring supporting the lens so turn it anticlockwise . Avoid damage the lens while turning the ring.
    • Now we are going to remove the objective lens .

    • You can see a ring supporting the lens so turn it anticlockwise .

    • Avoid damage the lens while turning the ring.

    • The lens and the ring

  3. Manta Precision Bit Set

    112 Bits für jede Reparatur.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  4. Lets focus on eyepiece part. Once again just turn the plastic cap like screw and you will get one lens of eyepiece mechanism.(In the image you can also see the thumb screw which is used to lock inner tube position) Now point the open end of inner tube downwards,you will see a plastic cylinder.
    • Lets focus on eyepiece part.

    • Once again just turn the plastic cap like screw and you will get one lens of eyepiece mechanism.(In the image you can also see the thumb screw which is used to lock inner tube position)

    • Now point the open end of inner tube downwards,you will see a plastic cylinder.

  5. Now removing the cylinder you will get one more convex lens. repeating the previous step you will see more cylinder and lenses (watch the image)
    • Now removing the cylinder you will get one more convex lens.

    • repeating the previous step you will see more cylinder and lenses (watch the image)

    • All the cylinder and lenses in the image are in the steel tube next to them .

  6. Finally the telescope is disassembled . I hope you didn't waste 1 minute of your life .
    • Finally the telescope is disassembled .

    • I hope you didn't waste 1 minute of your life .

Nitin Agrawal

Mitglied seit: 15.11.2010

31 Reputation

1 Anleitung geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 1

Letzten 30 Tage: 7

Insgesamt: 6,592