Monitors Not Turned On Press and hold the power button for 2 seconds to turn on the baby monitor. Repeat the same process for the parent monitor until the screen display lights up. Monitors Not Within Range Move the parent monitor closer to the baby monitor, but do not get closer than 3 feet from the baby monitor. Monitors Need to be Reset Reset the monitors by turning them off and unplugging them from their electrical power. Wait 15 seconds and then plug them back in again. Turn on the monitors and allow up to a minute for the monitors to synchronize.
Monitor out of range The monitor’s may be too far apart from each other. Try to get closer to the other monitor. If this does not help, try to adjust the sensitivity level. Need to adjust sensitivity level Try to adjust the sensitivity level to a lower level to avoid audio feedback. Monitors may be too close ¶ The monitors have to be more than three feet away from each other. Try backing up from the monitor to get rid of noise. If this does not work, try adjusting the sensitivity level.