Thor

You know, I'm pretty sure you're right. But while looking for both images to show side by side, Google shows both the ribbons the same. I did notice the strip across the bottom missing from the mini1. Tho I can currently only vouch for the mini2 in front of me. -Both of these images are from a Google search result. I am not the photographer. All credit goes to them, and all that jazz.

I leave screen on as well for this. - Tho I prefer a 45 degree lean.

Right. while possible with a T3, it grinds out the center of the screws, making a hassle for the next guy who has to get in there. T4 feels secure.

Same. - also Verizon unit. (w/unlocked BL) none worked.. - Absolutely LOVE V/branded phones. :D

Data Connector on underside of board. Image added. (likely requires mod approval.)

Right. WiFi/Bluetooth share same radio/frequency/bands.

If using Large Block HDDs (2TB+?) You have to prep it in windows. (or DOS if you prefer) fat32, and (I believe) set to 4096 cluster size. - I optionally partitioned mine to 4x 500GB for simplicity, and works great. Designate which to install games to in Xbox system. (Windows 10 now)

*Edit- You don't have to, It is Simpler/Optimal to.

That's the external HDD USB port. Laptop/external HDDs once again plug&play after quick MS system format.

If/when adding a more powerful magnet, while also having an.. aggressive driving style, would like to recommend securing the magnet with a bit of adhesive/rtv.

Landings and/or lateral slide (drifting) can dislodge magnet, potentially sending into gears for critical failure.

Disconnect the battery connector 1st! (Step 11) then press the power button, to discharge any remaining power still in caps.

After much trial and error, (Ipad mini3 now @ end of life) many have had issues with the l.c.d.s blowing a circuit while disconnecting it's connector, with the battery still connected. While not always, and not for everyone, it is still very possible, especially with a >25% charged battery. The safer alternative only takes a 10sec detour to step11, and wages nothing, just in-case.

Try not to insert opening picks too far, (as shown in image 2) or they could very easily scratch the l.c.d. under the front panel. If the pick can be seen inside of the outer bezel, (border) it is in too far.