Also, an actual spacer would helped - coins kept sliding off as I was heating them.
With the potential of electronics, I would like to have seen an quantitative temperate referenced as well as the qualitative (subjective).
If you are replacing the adhesive liner, the remaining release liner strips will interfere with the two outer screws. I had to cut a working section out of the liner at each location and move it aside with the spudger.
Sobald er das hat, wird er in der Lage sein, eine Grafik zu seiner im Laufe der Zeit erlangten Reputation zu sehen.
Hier ist eine Vorschau, wie die Grafik aussehen wird:
Noch keine Reputation erlangt.