Antwort auf „Security Screw Driver 4PS SCUF”okay I got it. (I am using a regular controller for reference because I am NOT going to be putting that screw back into my controller) I used the Pro Tech Toolkit for this one. The Spanners are the third row down on the far right. This is what my controller looks like rn. *image 1 and 2* So I used the Spanner 6 the to loosen the SS (security screw) a bit by going at it at a 90* angle from the top of the controller *image 3*. Next using a combination of Spanner 6 and 8 move to the bottom of the controller and putting directly on top of the screw *image 4* press down until the Spanner 6 or 8 gets caught in a grove (you can catch one or two), add pressure by pressing down on the screw then spin. It may take a bit but that’s how I was able to do it.