audio01mail

Hi, this seems to be a common problem... I already read a couple of reports about this particular problem with Unibody...

Hi again, the problem was that I moved the backlight's plastic background a bit (maybe yanked the cable while disassembling). This "plastic background" is where the LEDs are connected. So I disassembled all again, lightly pressed the zone where the LEDs are attached and presto! Working perfectly again! Thanks!

Hi again, it wasn't the cable. IMHO it's very easy to re-attarch this cable. It has just 2 contacts. The problem was that I moved the backlight's plastic background a bit (maybe yanked the cable while disassembling). This "plastic background" is where the LEDs are connected. So I disassembled all again, lightly pressed the zone where the LEDs are attached and presto! Working perfectly again! Thanks!

well, this is old, but did you connect the backlight ribbon to the zif connector?

You missed marking the important LSI FW843 Firewire controller chip in Step 12 (it's between the Broadcom BCM57765B0KMLG and Parade PS8301 chip).