Tom Korovesis

If yes, does it include the eMMC chip needed? If you didn’t know if you don’t actually have the original module is...

Call me an idiot but, I stripped a bit of the back screw with a chinese screwdriver, still grabs, but seeing Wulff Den’s...

https://m.alibaba.com/product/6218611990...-Screen-Touch-Display-Digitizer-Assembly.html

https://www.ebay.com/c/19015251196

If you replace the port it might work

No it won't. It will be useless

Welp.. Y00 is correct you might have presed a lot. Y00 works for me

You need a glass only panel? Or the whole screen? Update (07/24/2019): Whole part: https://www.ebay.com/itm/OEM-Motorola-Moto-G7-XT1962-1-4-LCD-Display-Touch-Screen-Assembly-Replacement/311986392295/ Glass only: https://www.ebay.com/itm/For-Motorola-Moto-G7-XT1962-1-XT1962-4-6-24-Touch-Screen-Lens-Glass-Replacement/333162477929/ For adhesive you will need Double Side Adhesive tape. Ifixit doesn’t carry your part yet. Be sure to buy the iOpener set with tools as its enough to do the job unless there is any special screw in (aka if you have a protech toolkit it will be helpful plus a cool gadget is never bad. https://www.youtube.com/watch?v=Mnw6LGOi... is the tutorial of replacement.

Something bad has happened and i fear its board level. A psu might be faulty but fear for the worst.

Does the tv remote work? Please Put a camera on top of the remote where it transmits signal. Press buttons. If the batteries and the controls are fine your camera will show light. Else the remote might not function. Replace batteries and if that doesnt work remote.

Tronicsfix in his channel has had many unfixable consoles having same symptoms. Hope it's just a bad

I have experience in switch repair. Can you see anything on the screen? Does it go to rcm? Is your unit rcm exploitable, if yes depending on your fuses we can rebuild the nand if this is hppefully a software issue. Else I am worried it might be something

It really shouldn’t. In my opinion, metal to metal is more prone to break, maybe the rail or the joycon, but yeah feels much sturdier. So worth it.

Strange.. I did both and never had such issues. I just do this trick; first I cover the area, 2nd I remove the energy by when raising at pushing slowly grabbing back if you understand. Kinda hard to explain.

I just bent that and refitted it. Force INDEED works.

You mean the screws? Break off the shell! A perfect opportunity to put some clear ones :))

It seems rather strange.. Its pretty easy to reattach. All I have is a $@$*!& ph00 + y00 that stripped the screws so I broke the cover. Technically not my fault. I have done multiple reshells.