Antwort auf „How can I remove display bezel from anti glare”I just published a guide for this: MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement
Antwort auf „MacBook Pro 15 Remove the Silver Bezel”It is glued. MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement
Antwort auf „How to replace LCD High Res Antiglare Matte version”MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement
Antwort auf „Disassembling the Anti-Glare Screen”Guide Published!: I finally published a guide on replacing the Matte finish LCD. You can find it here: MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement Update: I just went ahead and tried to remove the Matte LCD screen and was successful. The key is to remove the bezel, which is attached to the assembly using doublesided tape, similar but not exactly as with the glossy screen. Underneath the bezel, the screen is screwed in just like the glossy LCD assemble. As with the glossy, a heatgun works for this purpose. One big difference from the glossy (aside from the bezel) is that there is NO coverglass. The matte glass you see is optically bonded to the display, which is screwed in underneath the bezel, and so using suction cups will not work. It helped me tremendously by removing the rubber seal around the bezel first. Steps were: 1. Remove the display assembly as described in steps 1-20 of the glossy tutorial MacBook Pro (15 Zoll, Mitte 2010, Unibody) LCD austauschen . 2. Applied heat around the...