for me the best way was to put in the main board first and plug the coax cable there and aligne the cable back to the bottom board, there its has some space for the cable.

dont forget to take out the coaxial cable out of the frame, be very carefully with this cable.

Instert it in the new frame and push it carfully with the flat end of the spundger into the cable channel.

Hi, you are right, there should be a hint to buy those tools. Maybe you have a guitar pick or a very thin spatula or putty knife. It is better to not use metal, to not damage the frame, but if you have no other tool this may help.

Super einfach, danke für die tollen Bilder.

Ich hab dies nur gemacht um das Phone mal wieder von Staub zu befreien, vor allem bei den Lautsprecheröffnungen hat sich einiges angesammelt.