Erhalte schnellen Zugriff auf Anleitungen, Ersatzteile und Antworten für deine Geräte
Dein Warenkorb scheint leer zu sein
A magnetic Philips #0 makes this much easier to reassemble than non-magnetic.
This reassembly needs to precede the installation of the the plastic that covers the fan.
Prepare steps 24-22 on reinstallation, so you know where to line up the tape. These steps go somewhat together on reassembly.
Bend the levers in step 35+36 slightly before reassembly, so that the screws push them down tighter. The levers appear to slacken with age.
There's another four wire connector on the back of the board on the right, connected to an unused item that appears to be USB (but that would have five wires, right?)
When reinstalling, insert left side first, slightly pry right side of case to get motherboard to seat.