If your pressure contact pops out you might find the video at http://www.hightechdad.com/2013/05/07/ho... helpful
The spudger is very handy at this point.
You can pull the board out about 1cm with the wires intact.
I found the same as Jeff.
The 3rd screw needed a T5, for me.
Sobald er das hat, wird er in der Lage sein, eine Grafik zu seiner im Laufe der Zeit erlangten Reputation zu sehen.
Hier ist eine Vorschau, wie die Grafik aussehen wird:
Noch keine Reputation erlangt.
If your pressure contact pops out you might find the video at http://www.hightechdad.com/2013/05/07/ho... helpful
The spudger is very handy at this point.
You can pull the board out about 1cm with the wires intact.
I found the same as Jeff.
The 3rd screw needed a T5, for me.