Antwort auf „pairs with phone but doesn't play anymore”I'm sorry I think your in the wrong section, or not. please read my answer above too, if your using Mac's 2 latest operating systems. Yosemite & El Capitan, they are working on some bugs. Do you have a power light come on? It's red, and blue if bluetooth is working from your unit. Are you sure your Batterie is charged? If you threw away your instructions they are downloadable at Jam's website, here is a link... [http://www. described.com/customer-support/instruction-books] Your problem is different than the 1st question, there is some grey area there however I hate to say this, your question is in the "Add your answer" section. So you have credit for 1 answer. I am just as new as you are, an easy mistake to make. This is the best site on the web!! Pauz
Antwort auf „pairs with phone but doesn't play anymore”The reset described below worked... http://macdrug.com/bluetooth-connectivity-does-not-work-properly-in-mac-os-x-capitan-fix/ Until El Capitan, OS X 10.11. Apple is having problems with some unspecified Bluetooth problems. With lingering problems after their latest update that addressed Bluetooth problems. Perhaps they will fix it over time? Apple has disclosed about some of the connection issues they are having. i.e. Sandisk Memory cards were in the same boat. https://discussions.apple.com/thread/725... For all other operating systems just follow the manual instructions that came with that mighty little speaker. My JamBox worked fine for years, until the micro usb connector came loose then broke. Jam Classic Manual, [http://www. described.com/customer-support/instruction-books] Depending on your device you may be prompted to enter a pairing code. If prompted enter “0000” as the code. Press and hold the PLAY/PAUSE button for 5 seconds to activate pairing mode. I looked up your phone, and it had more...