iPhone, iPad and iPod repair technician working for myself in Prestwood, Buckinghamshire!
Repairing things for 5 years now and I still haven't seen quite everything!
Visit my website iPrestwood if you want to get in touch!
Where can I find a replacement for the Bluetooth Flex?Hi there, I am looking for a replacement Bluetooth antenna for the iPod Nano 7th gen, I cannot seem to find this part anywher...
Hat geantwortet auf: New LCD screen goes white but it works fine if pressed.Rear replacement housings are almost always a bad fit, the only ones I have ever managed to fit properly are the ones with the bezel already attached to it. As for the LCD try to make sure no dirt or debris is in/around the connectors on both the board and the LCD flex cable. It may be worth cleaning them both with isopropyl too (make sure to use 99% or above and a clean cotton bud or piece of microfiber cloth). If this doesn't work then the LCDs ribbon cable may be damaged and the whole part should be replaced.
Hat geantwortet auf: Battery shows it is connected to charger but will not charge upFirst try with a different charger, if that doesn't work replace the dock connector and if that doesn't work order a new battery. I prefer this order as a new dock connector is easier than replacing a battery and trying a different charger/plug socket is the easiest of them all! It may also be a good idea to look inside the dock connector for fluff and bits of tissue from your pocket and clean these out as they can occasionally prevent charging
Hat geantwortet auf: installed new lcd screen, cant hear anything when someone calls meThe best way to test this is to use the voice recorder app and make sure that the "speaker" button in the top left corner of the screen isn't enabled - this means that the sound recording will play through the ear speaker. If you can't hear anything then make sure that ribbon cable number 3 is fully pushed in, I like to use a pair of tweezers to help me and then the blue opening tool to flip down the clamp on the logic board. If you still can't hear anything then you may have a faulty part, if you bought from eBay they should sent you another without a problem - in the UK I pay £15 for the whole mid-frame, ear speaker and home button and I have never had any problems in this price range! I think that's around $20 As for the screen brightness you could try using another LCD to see if you get the same problem. If you do you might have a bent pin on the logic board which requires a difficult repair.