Hat geantwortet auf: How can I take this apart?So, the problem was that after using the "Line in" jack for couple of weeks, the left channel was silent when I switched back to Bluetooth. Both channels did perform normally when plugging the "Line in" jack. Here's what I did just 5 minutes before writing this message: 1) Grabbed and removed the cushion from the left headphone 2) Ignored the screws which stared at me 3) Tried rotating the left headphone off (like in the image user "arsdezi" posted) but %#*@, it's too tight 4) Ignored the screws again; they're not the ones holding the headphone part 5) Put on my winter gloves and try rotating the left headphone off with even more force: success 6) The "Line in" jack has four contacts; with the tip of a screwdriver, I pressed down the contact that was in the "deepest" end of the jack while the headphones were ON and switched to Bluetooth, to test if the sound finally comes out of the left channel: yes, it did 7) Pressed the contact down with force, while soldering some tin on it to hold it down 8) Assembled ev...
Hat geantwortet auf: How do I get my Ipega 9023 to work for my iOSAs iOS was updated to version 9.2, there were some software-wise changes on how gaming controllers interact with the iOS device. The change rendered a big amount of controllers useless. iPega 9023 is one of them. Simply put: No, it doesn't work with your phone. Yes, there might be something you could do, but if you have to ask what it is, it's probably too difficult. Also no, I won't help you with your 30-buck gamepad by email. It's not 1997 anymore.