Hat geantwortet auf: iPhone 3GS reboot during callRobert, I found a post here: http://discussions.apple.com/thread.jspa... Look at post 29 from "Homer4x4" It seems updating the IOS 4.0.1 (now 4.2.1) resolves this issue. I hope this is helpful. Try using ITunes to update your device to the latest IOS. Sam
Hat geantwortet auf: Won't Boot, just circle of deathBob, I found this information on another post. This is not the fsck -fy, but a derivative. Please try this out and see if it helps. Boot off the OS X CD (reboot, hold C while booting). The installer will load up, go to Utilities in the menu and run Terminal. Type df and look for the drive that has your Mac system mounted---you'll have to unmount this. On my MacBook Pro, it was /dev/disk0s2. Type umount /dev/disk0s2, replacing disk0s2 with whatever disk your OS lives on. Type fsck_hfs -r /dev/disk0s2. If you umounted the wrong thing, it will complain that you can't repair a mounted drive. Go back and umount the right thing and repeat this step. I have done a little digging and several posts on the Apple boards state that you will see that error anytime you run disk utilities from a live OS. It is not the error that is concerning as much as any stated issues in RED. You did not mention if this is Tiger, Leopard or Snow Leopard. But as long as you use the OS-X CD/DVD, that should be fine. I hope this is helpful....
Hat geantwortet auf: screen fades after being turned onYou may want to try checking this website out (see link). It has several "hidden" options for diagnosing many areas of the Nuvi line. Also, when was the last time you updated the base system? http://www.noeman.org/gsm/garmin-tutorials-discussions/141052-secret-startup-commands-hidden-menus-garmin-devices.html I hope this helps.
Hat geantwortet auf: I might have damaged the inverter cableCan you try plugging in an external monitor? That would let you know if this is a bigger issue. As the video cable is Ziff, did you pull it "away" and not up when you unplugged the old, using the provided clip/flip? Is the connector the same for the male portion (old versus new)? Once you plugged in the connector, were you able to swing the clip back over the top? Did it fit snuggly?