iPhone 3G battery wont charge and wont connect to itunesI have an iphone 3g which has been completely stripped down. I have put a new screen in, new power ribbon and new dock connec...
Hat geantwortet auf: rrod death kit fix did not workYou need to have the following reflowed: ram chips and both processors. I have a chap in Cornwall UK has does my reflow's. A reflow is where you melt the solder under the chips and allow them to make a good contact again. The xclamp fix is only a temporary repair and only works 80% of the time (in my experience). A reflow is what you need my friend.
Hat geantwortet auf: Power button replacement not workingThey can be quire fiddly to install, I have done many myself. Also bear in mind that the rear case might be too tight around the power button. I have had a few where I have had to use a small file and make the power button hole a little bigger for the button to move in and out. Also sometimes if the screws are done up too tight it can stop the button from operating correctly.
Hat geantwortet auf: After repair, won't charge or connect, proximity sensor also busted.Can I ask did we ever get to a resolution / what might be the problem on this topic, I have the same issue