Hello, I just saw your comment. Hereis the pinout of the wires going toward the headset from the sound board Here are the wires attached down the left side of the PCB (when looking at the bottom). From the edge of the PCB inward they are: Solid copper, going to F_B red/green spiral, F_L Solid Green going to S_R Red/copper spiral going to S_L Solid red going to R_R blue/green spiral. going to R_L Above that a large black cable carries a white wire to M+ and a copper to M- Here are the wires attached at the bottom of the PCB. From the corner of the PCB outward they are: two blue/copper cables going to GND2 Red/Blue spiral going to Cen_L Solid Blue going to Cen_R Solid Black going to Sub_R Solid Black going to Sub_L Two Green/Copper cables going to 5V Two Blue/copper spiral going to - If you need the pinout for the other side of the board (towards the computer,) just ask.