Reputation im Laufe der Zeit
Reputationsverlauf
Ereignis | Anzahl | Summe |
---|---|---|
Beitrag wurde positiv bewertet | 3 | 36 |
Hat eine Antwort akzeptiert | 1 | 10 |
Moderierte Änderung an Anleitungsschritt akzeptiert | 3 | 3 |
Moderierte Änderung an Anleitung akzeptiert | 2 | 2 |
The screws are of various lengths, so note carefully which order you remove them so as to replace them correctly. Especially note that of the three screws surrounding the right fan, the one closest to the optical drive is slightly longer that the other two (which are the same length).
When I was attempting to reinstall the logic board (step 21 in reverse), a small rubber bumper came loose from 'somewhere' on the board (I think). It isn't visible in any of the photos, so I really have no idea where it came from!
Echoing the notes from 'boo' and Corey -- that's exactly what I saw too. Perhaps the guide should be updated?
Note that the pull tab is not actually attached to the battery. It is attached to the iPhone chassis, and is only used to separate the battery from the adhesive. (Don't expect it to come out with the battery!)
Also, the adhesive is VERY strong. I had to use my plastic opening tool to assist in prying the battery loose. This is probably the most nerve-wracking part of the job.