Nikon D3100 Troubleshooting

Camera is not responding to the power switch.

Remove batteries and plug into charging station. If the battery is not recharging consider buying a new battery.

Plug battery into charging station. Make sure the outlet is working as well. If light does not turn on consider buying a charging station.

LCD screen will not show anything after powering on camera.

Ensure the battery is fully charged by plugging it into the charging station. If the battery does not recharge, consider buying a new battery.

Option 1: Turn camera on > Menu > Playback > Image Review > Ensure it says ON. If not, click “OK” to set to “ON”

Option 2: Click Menu again > Set Up > Auto Info Display > Ensure it says ON. If not, click “OK” to set to “ON”

After charging battery, if the LCD screen still does not turn on, refer to this guide to replace the screen.

Camera will not record sound.

Make sure there is nothing blocking the microphone (such as the user’s hands or some clutter previously obtained from previous outings). It is the three small holes located right above the “D3100” logo on the front of the camera.

Make sure “ON” is selected in ‘’Sounds’’ under ‘’Movie Settings’’.

After ensuring there are no obstructions blocking the microphone and checking the settings, if sound is still not being recorded refer to this guide to replace the microphone.

When I press the shutter no new picture is captured.

Ensure lens cover in front of the camera is off. This may sound simple but many users overlook simple fixes and make bigger problems for themselves.

Consider deleting any unnecessary or extra photos. You may also upload the pictures on the SD card to a computer and then delete the images off the SD card. If unable to do this consider buying a new SD card.

If the button is not moving there may be an obstruction keeping it from pressing down. Refer to this guide to clean that area around the button.

If there are no obstructions and is able to be pressed in but still does not capture any pictures, the button may be faulty or disconnected. Refer to this guide to replace the button.

Command dial is not changing the settings.

Turn off camera. Pull out the battery. This may work if this is a one time thing. If the problem is repeating move onto other possible answers below.

There may be clutter in the dial from just regular wear and tear. Try to just rotate the dial itself. This could loosen up any potential clutter or corrosion that has built up from previous contacts.

Press “menu” button to the left of LCD screen. Select “shooting menu” or “Setup Menu”. Scroll down until you find “Reset Shooting Options.” Then press “OK”, highlight “yes” and press “OK” again. NOTE: This will reset all of your other personal settings. You will need to adjust other settings you have previously adjusted.