Zum Hauptinhalt wechseln

AC-Netzadapter für MacBook, MacBookPro und MacBook Air. Ausgestattet mit einem magnetischen Stecker, der sich von selbst trennt, wenn daran gezogen wird. Die MagSafe Netzteile der ersten Generation (2006-2012) haben einen etwas dickeren L-förmigen Stecker. Erhältlich in 45 W, 60 W und 85 W.

65 Fragen Alle anzeigen

Correct wiring of MagSafe power adapter

Hi,

recently I repaired my magsafe adapter because the wire to the end of the power adapter got broken. I repaired it by opening the case and rewired it. My the wiring was it bit loosely and the connection was broken again. Now I wanted to rewire it but, I don't remember which wires belong together.

Here you can see a photo of the adapter. Which of these (the left or the right) belongs to the inner and outer wire of the cable?

http://charges.fotastisch.de/magsafe_rep...

Update

Thanks!

Connected it like you said and checked it with a voltmeter. All works fine :)

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 2
1 Kommentar

My charger got damaged and i repaired the charger but mistakenly i connected the wire in opposite manner (positive with negative and negative with positive). So, when i reconnect to other chargers it is not working. Please help me.

von

Einen Kommentar hinzufügen

4 Antworten

Gewählte Lösung

Here's a pictorial repair guide on the adapter that may help clarify your endeavor: http://www.instructables.com/id/MacBook-...

War diese Antwort hilfreich?

Bewertung 4
Einen Kommentar hinzufügen

Wikipedia says that the outer pins are ground and the inner pins are +16.5VDC. Your picture shows two wires -- black, and green/brown.

By convention, black is ground, so that would make the other wire +16.5VDC -- therefore, the black wire is the outer pins and the green/brown wire is the inner pins. However, in order to avoid blowing up your expensive computer, please double-check the polarity of your power supply using a voltmeter. (Wikipedia also says that your power supply may measure +6.86V with no load -- so the important thing to measure is the polarity.)

War diese Antwort hilfreich?

Bewertung 3
Einen Kommentar hinzufügen

Apple is now replacing these adapters for free as part of a class action settlement. Since you've already worked on this one they won't replace it but for any others out there that have this issue, take it back to Apple for a free one.

War diese Antwort hilfreich?

Bewertung 3

1 Kommentar:

Do you have any link on this settlement?

von

Einen Kommentar hinzufügen

http://news.cnet.com/8301-13579_3-573210...

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

Thanks for the link!

It seems that the replacement applies to US customers only, though. Have free replacements been given in the UK too? (I've done a bit of googling but haven't uncovered an answer either way.)

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Kai wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 8

Letzte 30 Tage: 35

Insgesamt: 49,717