三星盖乐世 S8 Plus背板更换指南

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 5 Anleitungen, die diese beinhalten.

Englisch

Chinesisch

Schritt 10 übersetzen

Schritt 10

During reassembly, in order to reconnect the fingerprint sensor cable, first angle the back cover into position until the cable connector lines up perfectly over its socket.
Then, use the flat end of your spudger to gently snap the connector into place by pressing it straight down.
If you have slender hands, you may be able to press the connector into place with your finger. Just be careful not to strain the cable.
This takes patience and a bit of practice. Don't rush it or attempt to force the connector into place.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.