Zum Hauptinhalt wechseln

iPhone 8 Plus バッテリーの交換

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen auch die Anleitung, die diese beinhaltet.

Englisch
Japanisch
Schritt 3
iPhone 8 Plus Battery Replacement: Schritt 0, Bild 1 von 3 iPhone 8 Plus Battery Replacement: Schritt 0, Bild 2 von 3 iPhone 8 Plus Battery Replacement: Schritt 0, Bild 3 von 3
  • Try to keep the adhesive strips flat and unwrinkled during this procedure; twisted or wrinkled strips will stick together and break instead of pulling out cleanly.

  • Additionally, do not press down on the battery as you pull the strips. Pressing on the battery creates pressure points that can snag and break the adhesive.

  • Slowly pull one battery adhesive tab away from the battery, towards the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at as low an angle as possible, without snagging it on any of the iPhone's other components.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

  • If the battery adhesive tabs break during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.

  • If any of the adhesive strips break underneath the battery and cannot be retrieved, try to remove the remaining strips, and then proceed as instructed below.

この手順の間は、接着ストリップを平らにシワにならないように維持してください。ねじれやシワが入ると、きれいに引き抜くことができず、くっついたり裂けたりします。

また、ストリップを引っ張る時に、バッテリーを下に押さないでください。バッテリーを押すと、接着剤がひっかかったり破損する圧力ポイントを作ってしまいます。

ゆっくりと、バッテリーから接着タブをiPhoneの下に向かって引き出します。

バッテリーとリアケースの間からストリップが滑り出てくるまで、一定の張力を維持して着実に引っ張ります。iPhoneの他のコンポーネントに引っ掛からない範囲で、ストリップを可能な限りローアングルで引っ張るのがベストです。

ストリップは、元の長さの何倍かに伸びます。引っ張り続け、必要に応じてバッテリーの近くで掴み直してください。

もしバッテリー接着タブを取り外す過程で裂けてしまった場合は、指か先の丸いピンセットで残った接着剤を取り出して、引っ張り続けてください。

もし接着ストリップがバッテリーの下で裂けて、どうしても取り出せず、ストリップを取り外すのが続けられなくなった時は、以下の手順を行ってください。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.