Repariere deine Sachen Community Store

Remplacement de la carte de contrôle secondaire Canon EOS 20D (C-Board 010)

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 2 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Französisch
Nächster Schritt

Schritt 1 übersetzen

Schritt 1
Canon EOS 20D Secondary Control Board (C-Board 010) Replacement, Disconnect all the labeled cables: Schritt 0, Bild 1 von 3 Canon EOS 20D Secondary Control Board (C-Board 010) Replacement, Disconnect all the labeled cables: Schritt 0, Bild 2 von 3 Canon EOS 20D Secondary Control Board (C-Board 010) Replacement, Disconnect all the labeled cables: Schritt 0, Bild 3 von 3
Disconnect all the labeled cables

  • Disconnect all the indicated connectors by opening their latches.

  • Remove the flex cable that connects the logic board to the secondary control board.

  • Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running into the connector.

  • Disconnect the two hidden connectors under the top connector indicated in pink.

  • Disconnect the third hidden connector.

Débranchez tous les câbles étiquetés

Débranchez tous les connecteurs étiquetés en ouvrant leurs loquets.

Retirez le câble flexible qui relie la carte mère à la carte de commande secondaire.

Retirez le petit connecteur vert de sa prise. Soyez prudent lorsque vous le retirez, car il est possible de déchirer les minuscules fils reliant le connecteur.

Débranchez les deux connecteurs cachés sous le connecteur supérieur marqué en rose.

Débranchez le troisième connecteur caché.

[title] Disconnect all the labeled cables
-[* blue] Disconnect all the labeled connectors by opening their latches.
+[* blue] Disconnect all the indicated connectors by opening their latches.
[* orange] Remove the flex cable that connects the logic board to the secondary control board.
-[* green] Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running to the connector.
-[* yellow] Disconnect the two hidden connectors under the top connector labeled in pink.
+[* green] Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running into the connector.
+[* yellow] Disconnect the two hidden connectors under the top connector indicated in pink.
[* light_blue] Disconnect the third hidden connector.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.