Repariere deine Sachen Community Store

Sostituzione display Samsung Galaxy A3 (2017)

Zurück zur Anleitung
Englisch
Italienisch
Vorheriger Schritt

Schritt 5 übersetzen

Schritt 5
Samsung Galaxy A3 (2017) Display Replacement: Schritt 0, Bild 1 von 3 Samsung Galaxy A3 (2017) Display Replacement: Schritt 0, Bild 2 von 3 Samsung Galaxy A3 (2017) Display Replacement: Schritt 0, Bild 3 von 3

  • Don't open the phone all the way yet. The display cable is still threaded through the mid frame and you might rip the cables of the home and menu buttons.

  • Start to carefully lift the upper edge of the display assembly and thread the display flex cable through the mid frame.

  • Check if the home button or soft key button cables stick to the display assembly before your remove the display all the way.

  • In case one of the cables sticks to the display, carefully peel them off with a pair of tweezers or an opening pick.

  • Remove the display assembly from the phone.

  • Before reassembling make sure to remove any remaining adhesive from the frame by using isopropyl alcohol (>97%) and a lint-free cloth or Q-tip.

Aspetta ad aprire completamente il telefono. Il cavo del display passa ancora attraverso il telaio centrale e potresti strappare i cavi dei pulsanti home e del menu.

Inizia a sollevare con cautela il bordo superiore del gruppo display e fai passare il cavo flessibile del display attraverso il telaio centrale.

Prima di rimuovere completamente lo schermo, controlla se i cavi del pulsante home e del tast soft key sono attaccati al gruppo display.

Nel caso che uno dei cavi sia attaccato al display, staccalo con cautela con delle pinzette o un plettro di apertura.

Rimuovi dal telefono il gruppo display.

Prima del rimontaggio, rimuovi dal telaio ogni parte rimasta di adesivo applicando alcol isopropilico (>97%) con un panno privo di pelucchi oppure un cotton fioc.

[* icon_caution] Don't open the phone all the way yet. The display cable is still threaded through the mid frame and you might rip the cables of the home and menu buttons.
[* black] Start to carefully lift the upper edge of the display assembly and thread the display flex cable through the mid frame.
[* icon_caution] Check if the home button or soft key button cables stick to the display assembly before your remove the display all the way.
- [* black] In case one of the cables sticks to the display, carefully peel them off with a pair of tweezers or an opening pick.
+ [* black] In case one of the cables sticks to the display, carefully peel them off with a pair of [product|IF145-020|tweezers] or an opening pick.
[* black] Remove the display assembly from the phone.
[* black] Before reassembling make sure to remove any remaining adhesive from the frame by using isopropyl alcohol (>97%) and a lint-free cloth or Q-tip.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.