Repariere deine Sachen Community Store

三星Samsung Galaxy S20 Ultra 后盖拆除教程

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 17 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Chinesisch
Schritt 5
Samsung Galaxy S20 Ultra Back Cover Removal, Separate the left edge adhesive: Schritt 0, Bild 1 von 3 Samsung Galaxy S20 Ultra Back Cover Removal, Separate the left edge adhesive: Schritt 0, Bild 2 von 3 Samsung Galaxy S20 Ultra Back Cover Removal, Separate the left edge adhesive: Schritt 0, Bild 3 von 3
Separate the left edge adhesive

  • Apply a suction cup to the back of the phone, as close to the center of the left edge as possible.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • As the glass on this edge is curved, you won't be able to insert this pick very far. As long as the very tip of the pick is underneath the glass's edge, you will be able to proceed.

  • Due to tight tolerances, this may take multiple attempts.

  • If you are having trouble creating a gap, apply more heat to the edge and try again.

  • You can try also applying a few drops of high concentration (over 90%) isopropyl alcohol into the seam to help loosen the adhesive.

  • Do not apply excessive force with the pick, or you risk cracking the back cover glass.

分离左边缘粘合剂

在手机背面尽可能靠近左边缘的中心放置一个吸盘，用稳定的力拉动吸盘。

插入后盖和框架之间形成间隙。

由于此边缘上的玻璃是弯曲的，因此你无法将此三角撬片插入很远。

只要尖头位于玻璃边缘下方，你就可以继续进行操作。

由于太紧，可能需要进行多次尝试。

如果你在创建间隙时遇到困难，请在边缘上施加更多的热量

你也可以尝试在接缝中滴几滴高浓度（超过90％）的异丙醇以帮助软化胶粘剂。

不要用尖头用力过度用力，否则可能会弄破后盖玻璃。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.