Repariere deine Sachen Community Store

Retrait de la coque arrière

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 14 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Französisch
Schritt 7
Back Cover Removal: Schritt 0, Bild 1 von 3 Back Cover Removal: Schritt 0, Bild 2 von 3 Back Cover Removal: Schritt 0, Bild 3 von 3

  • Be careful near the corners, as the glass is weakest there.

  • Insert an opening pick into the lower-left corner of the rear panel.

  • Using another opening pick, cut the adhesive along the left edge of the rear panel.

  • Don't insert an opening pick in more than halfway on the left edge near the fingerprint sensor or you may damage the ribbon cable inside.

  • It is fine if opening picks fall out as the back cover becomes separated.

Insérez un médiator dans le coin inférieur gauche de la coque arrière.

Prenez un autre médiator pour trancher l'adhésif le long du bord gauche de la coque arrière.

N'enfoncez pas plus de la moitié du médiator au niveau du lecteur d'empreintes digitales, vous risquez d'endommager la nappe à l'intérieur.

Ce n'est pas grave si les médiators tombent au fur et à mesure que la coque se soulève.

+[* icon_caution] Be careful near the corners, as the glass is weakest there.
[* black] Insert an opening pick into the lower-left corner of the rear panel.
[* black] Using another opening pick, cut the adhesive along the left edge of the rear panel.
-[* icon_caution] Do not insert an opening pick in more than half way on the left edge near the fingerprint sensor or you may damage the ribbon cable inside.
+[* icon_caution] Don't insert an opening pick in more than halfway on the left edge near the fingerprint sensor or you may damage the ribbon cable inside.
[* icon_note] It is fine if opening picks fall out as the back cover becomes separated.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.