Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 27 Anleitungen, die diese beinhalten.
Schritt 4 übersetzen
Schritt 4
Unclip the back panel
-
Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base.
-
Pry up the back panel to release it from the locking clips.
| [title] Unclip the back panel | |
| [* black] Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base. | |
| - | [* black] |
| + | [* black] Pry up the back panel to release it from the locking clips. |
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.